Headphone Amps and Cue Systems

16-Channel Personal PRO Monitor Mixer

OCTOHB4H Hear Back OCTOHBM Mixer

Expansion Bridge for use with Aviom AN-16/i and AN-16/o

HBM Hear Back Mixer  Mixer for all Hear Back Hubs

Personal Monitor Mixer, 42 channel

Hear Back OCTO 4-Pack Personal Monitor Mixer System

Personal Monitor Mixer, 16 Mono/Stereo channels, 8 scene recall memories, 2-band EQ, limiter, PoE powered

(4) PRO Mixers, (1) Standard PRO Hub, (4) 50' CAT6 Premium Cables, and (2) Analog DA-88 style cables

(4) PRO Mixers, (1) Hub Frame, (1) ADAT card, (1) Network Card, (4) 50' CAT6

(4) PRO Mixers, (1) Hub Frame, (1) AES card, (1) Network Card, (4) 50' CAT6

(4) PRO Mixers, (1) Hub Frame, (1) Dante card, (1) Network Card, (4) 50' CAT6

(4) PRO Mixers, (1) Hub Frame, (1) Waves card, (1) Network Card, (4) 50' CAT6

OCTOHB4H Hear Back OCTO Hub

10 Port PoE Monitor Hub, onboard network port,

Four Channel headphone amp with selectable talk back and monitoring. Aux inputs per channel.

Professional Six Channel Headphone Amplifier. Three outputs and aux in per channel - 1U

12-Channel Headphone Amplifier with USB

Dual button infrared wireless remote. Provides wireless remote control of Talkback and Monitor Select.

Aviom's A360 Personal Mixer brings new levels of control and customization to personal mixing

The A320 Personal Mixer gives performing and recording musicians simple, intuitive control over their monitor mixes.

Includes: 4x Mixers, 1x amp Hub, 4x 50 foot CAT5e cables, and 1x DB25 to 8-1/4"TRS cable.

(1)

The Phonitor 2 is our high-end headphone monitor amp and preamplifier operating on 120V rails.

(1) Hub Frame, loaded with (1) Mezzanine Board, (1) Hub Main Board, (1) External Power Supply

Box and Power Supply for use with an existing Network Card for PRO Hub

Headphone - Amplifier, stereo, XLR & 3.5mm TRS line in, level controls, adjustable limiter  *** INCLUDES BELT CLIP ***

6-channel matrix headphone amplifier

Four channel stereo headphone amp, 1/4” and 1/8” TRS I/O, 20dB Gain, line or headphone amp level.

Headphone - Amplifier, under-counter, 3.5mm & 1/4" TRS inputs, 1/4" TRS loop-thru, 3.5mm & 1/4" TRS output, 23dBV variable gain

Headphone - Amplifier, under-counter, balanced XLRF mono input,  XLRM loop-thru, 3.5mm & 1/4" TRS output, 23dBV variable gain

Headphone - Monitor, passive, 1/4" TRS & XLRF inputs, XLRM loop-thru, stereo concentric pot

Supplies signal and power to eight hear back mixers. Inputs provided for Analog, ADAT Optical and HearBus.

The Whirlwind PA-1 is a high output, low distortion, portable monitoring device suitable for critical listening in any professional audio environment

6-channel Headphone Amp with Independent Mix Control

AV-M8 - 8-Channel Mic-Level Input Module, Aviom

AV-P2 - 2-Channel Line-Level Output Module, Aviom

D800 - A-Net Distributor, with A-Net Bridge input, Aviom

D800-Dante - A-Net Distributor, with A-Net Bridge input and Dante interface, Aviom

1 AN-16/i-M Mic Input Module, 1 AN-16/i v.2 Input Module, 2 AN-16/o v.4 Output Modules

2 AN-16/i-M Mic Input Modules, 1 AN-16/i v.2 Input Module, 3 AN-16/o v.4 Output Modules, 2 SB4 System Bridges

3 AN-16/i-M Mic Input Modules, 1 AN-16/i v.2 Input Module, 4 AN-16/o v.4 Output Modules, 2 SB4 System Bridges

MT-X Expansion Box for MT-1a, Aviom

SB4 Rack-Mounted System Bridge, Aviom

The AN-16/i v.2 Input Module is used to connect up to 16 balanced line-level inputs from a console's direct outputs, insert points, aux sends, and/or submixes to a personal mixing system or digital snake.

The AN-16/o v.4 provides 16 channels of mic- or line-level outputs from a Pro16 system.

8 remote controllable microphone/ line input channels

The RockNet RN.341.MY card fits into a Yamaha MY-card expansion slot and gives access to 16 in- and 16 output channels

8 analog line output channels on XLR connectors

D400-Dante - A-Net Distributor, with A-Net Bridge input and Dante interface, Aviom