Home > Accessories >

Radial Engineering BT-Pro Bluetooth Stereo Direct Box

Radial Engineering BT-Pro Bluetooth Direct Box


 
-------------- Alternate Views: ---------------
List Price: $420.00
Product Price: $332.49
You save $87.51!
You'll earn 230 points
Mfg Model SKU R800 1055
UPC Code 6761010 4496 2
.



Product Code : R800-1057
QTY:

DESCRIPTION SPECIFICATIONS
 

Radial Engineering BT-Pro Bluetooth Stereo Direct Box


    Product Highlights

    • Bluetooth 2.0 with EDR
    • Bluetooth Range of 40 ft. , Line of Sight
    • Converts Bluetooth to 2 x XLR balanced Outputs
    • Stereo to Mono Summing switch for Dual mono outs
    • 16-Bit Compression, Variable Bit-Rate
    • On-Board Volume Control & Mono Switch
    • Ground Lift & switched Isolation Transformers Right and Left
    • Buss-Powered via Mini-USB, or external 5v PSU
    • Built-In Headphone Amp monitoring with 3.5mm Jack
    • Limited 3 year warranty from Radial

      The BT-Pro is a Bluetooth® direct box designed to capture the wireless transmission from a Bluetooth® enabled device and convert the signal to a balanced line for use in a PA or recording system.
      It employs an innovative T-shaped access cavity behind which is located the antenna. This is protected by a milled insert made from Sintra® – a rugged closed-cell PVC - that permits the wireless transmission signal to pass without interference, allowing reception distances of 12 meters (40') or more with line of sight between devices.

      The audio signal path itself employs the latest Bluetooth wireless A2DP interface over 2.0 EDR (Enhanced Data Rate) for higher speed transmission to deliver optimal audio quality.
      This standard employs a 16-bit wireless compressed format with the actual bit rate determined by the transmission source material.

      Inside, the BT-Pro converts the data to a stereo analog signal, producing up to +4dB at the output.

      The signal level is controlled by a front panel potentiometer that is shared with the built-in headphone amp with standard 3.5mm mini TRS that is used for troubleshooting.

      For greater flexibility, a stereo-to-mono switch sums the stereo output for dual-mono operation to reduce input channel requirements on the mixer or to share the signal between separate systems. Should noise be encountered, two side-mounted isolation transformers may be inserted into the signal path.
      This is supplemented by a ground lift switch for the XLRs to further help eliminate hum and buzz caused by ground loops.

      Connecting to the BT-Pro is easy. The BT-Pro is powered by an external 5V supply via a mini USB port and may also be powered from a laptop or USB hub.

      • Once turned on, two top-mounted LEDs will toggle as it awaits pairing.
      • Turn on your Bluetooth device and its transceiver sends an initial pairing message to identify the BT-Pro. This will show up as 'RadialEng'.
      • A connection pass code is then used to initialize the connection.
      • This important safety feature ensures other nearby Bluetooth devices cannot 'pollute or hijack' the system.
      • Once paired, the BT-Pro's blue LED will flash every 3 seconds to let you know the two Bluetooth devices are talking to each other.

      Noise & Hum Eliminators
      Isolation transformers and a ground-lift switch can be utilized to mitigate external noise, hum, and buzz
      Long Range
      The BT-Pro offers a range of 40'
      Buss-Powered
      The BT-Pro is powered by an external 5V supply via mini-USB port, and thus, can be powered from a laptop or USB hub
      Headphone Amp
      A built-in headphone amp with a 3.5mm stereo output is provided for trouble-shooting and other uses
      The Radial BT-Pro... a wireless DI made for professional touring.





      Share your knowledge of this product with other customers...Be the first to write a review

      Browse for more products in the same category as this item:

      Accessories
      Accessories > Audio Accessories > Direct Boxes
      Accessories > Audio Accessories