Home > Live Sound > Power Amplifiers > Power Amplifiers >

Crown CDi 2|300BL DriveCore 2x300W Power Amplifier with BLU link input
Crown CDi 2|300BL DriveCore 2x300W Power Amplifier with BLU link


 
-------------- Alternate Views: ---------------
List Price: $1,889.18
Product Price: $1,889.00
You save $0.18!
You'll earn 1529 points
Mfg Model SKU 691991006395
UPC Code 691991006395
.



Availability: PLEASE CALL FOR AVAILABILITY

Product Code : CDI2X300BL
QTY:

DESCRIPTION SPECIFICATIONS
 

Crown CDi 2|300BL DriveCore 2x300W Power Amplifier with BLU link input


The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost.
Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series),
the CDi DriveCore 2|300BL offers streamlined functionality to work in almost any small/medium sized installation such as restaurants, retail stores, and more.

Designed for ease-of-use in a variety of applications, the 2|300BL is a 2-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer.

The 2|300BL also comes with BLU link, adding the ability to send and receive channels over HARMAN’s digital audio BUS.

The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.
Inputs 3-pin block connectors
Outputs Terminal strips
Output Power Dual Mode:
@ 2 Ohms: 150 W (Per Channel)
@ 4 Ohms: 300 W (Per Channel)
@ 8 Ohms: 300 W (Per Channel)
@ 16 Ohms: 150 W (Per Channel)
@ 70 Vrms: 300 W (Per Channel)
@ 100 Vrms: 300 W (Per Channel)

Bridge Mono Mode:
@ 4 Ohms: 300 W
@ 8 Ohms: 600 W
@ 16 Ohms: 600 W
@ 140 Vrms: 600 W
@ 200 Vrms: 600 W
Voltage Gain 34 dB
Frequency Response Frequency Response (8 Ohms): ±0.25dB
Signal to Noise Ratio Signal to Noise Ratio (ref. rated power, (8 Ohms, 20 Hz to 20 kHz): >108 dB
Total Harmonic Distortion <0.35% (@ full-rated power, from 20 Hz to 20 kHz)
Intermodulation Distortion ≤0.35% (60 Hz and 7 kHz @ 4:1, from -30 dB to full-rated power)
Damping Factor >1000 (20 to 100 Hz)
Crosstalk >80 dB (below rated power, 20 Hz to 1 kHz)


BLU link (BL models only) – Both receive and send channels over HARMAN’s 256 channel, fault-tolerant audio BUS, BLU link
Features

DriveCore Technology – Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.

Network Control and Monitoring – Through Harman’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.

DSP – On-board Digital Signal Processor in each amplifier allows for custom configuration

  • Input Router
  • Input Delay – Up to 1000ms
  • Input Parametric EQ – 8 band
  • Crossover
  • Output Parametric EQ – 8 band
  • Output Delay – Up to 100ms
  • LevelMAX™ Limiter

BLU link (BL models only) – Both receive and send channels over HARMAN’s 256 channel, fault-tolerant audio BUS, BLU link

Direct Drive 70/100Vrms Output – Each output channel is capable of provide either 70V or 100V for high impedance applications.

Front-Panel Interface – Completely configure the amplifier using an intuitive front-panel interface.

GPIO/AUX Port – Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port.





Share your knowledge of this product with other customers...Be the first to write a review

Browse for more products in the same category as this item:

Live Sound > Power Amplifiers > Power Amplifiers
Live Sound > Power Amplifiers
Live Sound