 |
- Compact size — up to 2500 watts in two rack spaces, or 5000 watts in three rack spaces
- High-current toroidal transformers, for greater 2-ohm power and low noise
- Independent user-defeatable clip limiters reduce distortion
- Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom
- The 4000-watt RMX4050a operates on a standard 15 amp plug (120V)
- Both the RMX4050a and the RMX5050a feature a dual mono, high-current power supply for increased reliability and performance
- The RMX4050a's particularly exceptional combination of cooling capacity and electrical efficiency provides robust thermal performance suitable for high continuous power in 2-ohm stereo or 4-ohm bridged applications.
- Balanced 1/4” (6.3 mm) TRS, XLR, and barrier strip inputs
- Touch-proof binding post and Neutrik Speakon® outputs
- Front mounted gain controls for easy access
- Signal and clip LED indicators for monitoring performance
- Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers
- 3-year warranty plus optional 3-year extended service contract
| Model | RMX 850a | RMX 1450a | RMX 2450a | RMX 4050a | RMX 5050a | | Power per Channel, Stereo Mode (both channels driven) | | 8Ω, FTC 20 Hz–20 kHz, 0.1% tdD | 185 W | 260 W | 450 W | 800 (650**) W | 1050 W | | 8Ω, EIA 1 kHz, 0.1% tdD | 200 W | 300 W | 500 W | 850 W | 1100 W | | 4Ω, FTC 20 Hz–20 kHz, 0.1% tdD | 280 W | 400 W | 650 W | 1300 W | 1600 W | | 4Ω, EIA 1 kHz, 0.1% tdD | 300 W | 500 W (0.5% tdD) | 800 W | 1400 W | 1800 W | | 2Ω, FTC 20 Hz–20 kHz, 1% tdD | – | – | – | 1600 W | 2000 W | | 2Ω, EIA 1 kHz, 1% tdD | 430 W | 700 W | 1200 W | 2000 W | 2500 W | | Power, Bridge-Mono Mode | | 8Ω, FTC 20 Hz–20 kHz, 0.1% tdD | 530 W | 800 W | 1300 W | 2600 W | 3200 W | | 8Ω, EIA 1 kHz, 0.1% tdD | 600 W | 900 W | 1500 W | 2800 W | 3600 W | | 4Ω, EIA 1 kHz, 1% tdD | 830 W | 1400 W | 2400 W | 4000 W | 5000 W | | Signal to Noise (20 Hz–20 kHz) | -100 dB | | Distortion (SMPTE-IM) | < 0.01% | < 0.02% | | Input Sensitivity at 8Ω | 1.15V (+3.4dBu) | 1.23V (+4.0 dBu) | 1.42V (+5.3 dBu) | | Voltage Gain | 31.6x (30 dB) | 40x (32 dB) | 50x (34 dB) | 64x (36 dB) | | Output Circuitry | Class AB | 2-tier Class H | 3-tier Class H | Current Draw (120 V AC) Typical, 1/8 power pink noise at 4Ω* Severe, 1/3 power pink noise at 4Ω* | 4.5 A 6.6 A | 6.0 A 9.6 A | 6.3 A 15.6 A | 10.0 A 20.1 A | 13.9 A 26.9 A | AC Mains Plug 100/120V 230V | NEMA 5-15 CEE7/7 | NEMA 5-20 CEE7/7 | Weight Net Shipping | 35 lb (15.9 kg) 41 lb (18.6 kg) | 40 lb (18.2 kg) 46 lb (20.9 kg) | 44.5 lb (20.2 kg) 50.5 lb (23 kg) | 68 lb (30.8 kg) 77 lb (34.9 kg) | 75 lb (33.1 kg) 87 lb (37.2 kg) | Distortion (typical) 20 Hz–20 kHz, 10 dB below rated power 1 kHz and below, full rated power | < 0.03% tdD, 4Ω and 8Ω < 0.03% tdD, 4Ω and 8Ω | < 0.02% tdD, 4Ω and 8Ω < 0.02% tdD, 4Ω and 8Ω | | Frequency Response | 20 Hz–20 kHz: +0/-1 dB -3 dB points: 5 Hz and 50 kHz (LF filter bybassed, 8Ω) | | Damping Factor (1 kHz and below) | > 300 at 8Ω | > 250 at 8Ω | | Input Impedance | 10 kΩ unbalanced; 20 kΩ balanced | | Input Stage Clipping | 10 V rms (+22 dBu) | 6.4 V rms (+18 dBu) | | Cooling | Continuously variable speed fan, back-to-front air flow | | Connectors (each channel) | Input: Active balanced; 3-pin Euro-style detachable terminal block and XLR (pin 2+) Output: Touch-proof binding posts; Neutrik Speakon® | | Controls | Front: AC switch; Channel 1 & 2 gain knobs Rear: 10-position DIP switch | | LED Indicators | Power on: Green; Signal: Yellow (1 per channel); Clip/Protect: Red (1 per channel) | | Amplifier Protection | Full short circuit, open circuit, tdermal, ultrasonic, RF protection. Stable into reactive or mismatched loads | | Load Protection | Turn-on/off muting; AC coupling (850, 1450); Triac crowbar (1850HD, 2450, 4050HD, 5050) on each channel | | Dimensions | 3.5” (8.9 cm) tall; 2 rack spaces | 5.25” (13.3 cm) tall; 3 rack spaces | | Power Requirements | 100, 120, 230 V AC (factory configured), 50–60 Hz |
All specifications are subject to change without notice.
SPECIFICATIONS |
RMX 850 |
RMX 1450 |
RMX 1850HD |
RMX 2450 |
| |
STEREO MODE (Both Channels Driven) |
8 ohms
FTC 20 Hz - 20 kHz, 0.1% THD
EIA 1 kHz, 0.1% THD |
185 W
200 W |
260 W
280 W |
350 W
360 W |
450 W
500 W |
4 ohms
FTC 20 Hz - 20 kHz, 0.1% THD
EIA 1 kHz, 0.1% THD |
280 W
300 W |
400 W
450 W |
550 W
600 W |
650 W
750 W |
2 ohms
EIA 1 kHz, 1% THD |
430 W |
700 W |
900 W |
1200 W |
| |
BRIDGE MONO MODE |
8 ohms
FTC 20 Hz - 20 kHz, 0.1% THD
EIA 1 kHz, 0.1% THD |
530 W
600 W |
800 W
900 W |
1100 W
1200 W |
1300 W
1500 W |
4 ohms
EIA 1 kHz, 1% THD |
830 W |
1400 W |
1800 W |
2400 W |
| Signal to Noise, 20 Hz-20 kHz |
100 dB |
100 dB |
100 dB |
100 dB |
| Distortion (SMPTE-IM) |
Less than 0.01% |
Less than 0.01% |
Less than 0.02% |
Less than 0.02% |
| Input Sensitivity @ 8 ohms |
1.15V (+3.4 dBu) |
1.15V (+3.4 dBu) |
1.16V (+3.5 dBu) |
1.23V (+4.0 dBu) |
| Voltage Gain |
31.6x (30 dB) |
40x (32 dB) |
46x (33 dB) |
50x (34 dB) |
| Output Circuitry |
AB |
AB |
Class H |
Class H |
Power Requirements
1/8 power pink noise at 4 ohms * |
5A |
6A |
6A |
7A |
| |
ALL MODELS |
Distortion (Typical)
20 Hz - 20 kHz: 10 dB below rated power
1.0 kHz and below: full rated power |
Less than 0.03% THD, 4 and 8 ohms
Less than 0.03% THD, 4 and 8 ohms |
| Frequency Response |
20 Hz-20 kHz, �1 dB
-3 dB points: 5 Hz - 50 kHz |
| Damping Factor, 1 kHz and below |
Greater than 300 at 8 ohms |
| Input Impedance |
10k ohms unbalanced, 20k ohms balanced |
| Input Clipping |
10 Vrms (+22 dB) |
| Cooling |
Continuously variable-speed fan, rear-to-front air flow |
| Connectors, each channel |
Input: Active balanced; barrier strip, XLR and 1/4" (6.3mm)
TRS tip and XLR (pin 2 positive)
Output: touch-proof binding posts and Neutrik� Speakon� |
| Controls |
Front: AC switch, Ch. 1 and Ch. 2 gain knobs
Rear: 10-position DIP switch |
| Indicators |
Power-On: Green LED
Signal: Yellow LED (1 per channel)
Clip: Red LED (1 per channel) |
| Amplifier Protection |
Stable into reactive or mismatched loads |
| Load Protection |
On/off muting, AC coupling (850, 1450), triac crowbar (1850HD, 2450, on each channel) |
| Power Requirements |
100, 120, 230 VAC, 50-60 Hz |
| Dimensions |
19" (48.3 cm) rack mounting, 3.5" (8.9 cm) tall (2 RU),
15.9" (40 cm) deep (rack mounting to rear support ears) |
| Weight |
35 lbs (15.9 kg) net |
40 lbs (18.2 kg) net |
44.5 lbs (20.2 kg) net |
44.5 lbs (20.2 kg) net |
* @ 120VAC, both channels driven; multiply current by 0.5 for 230V units
All Specification Subject to Change Without Notice.
|
|
 |