 |
- Compact size — up to 2500 watts in two rack spaces, or 5000 watts in three rack spaces
- High-current toroidal transformers, for greater 2-ohm power and low noise
- Independent user-defeatable clip limiters reduce distortion
- Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom
- The 4000-watt RMX4050a operates on a standard 15 amp plug (120V)
- Both the RMX4050a and the RMX5050a feature a dual mono, high-current power supply for increased reliability and performance
- The RMX4050a's particularly exceptional combination of cooling capacity and electrical efficiency provides robust thermal performance suitable for high continuous power in 2-ohm stereo or 4-ohm bridged applications.
- Balanced 1/4” (6.3 mm) TRS, XLR, and barrier strip inputs
- Touch-proof binding post and Neutrik Speakon® outputs
- Front mounted gain controls for easy access
- Signal and clip LED indicators for monitoring performance
- Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers
- 3-year warranty plus optional 3-year extended service contract
| Model | RMX 850a | RMX 1450a | RMX 2450a | RMX 4050a | RMX 5050a | | Power per Channel, Stereo Mode (both channels driven) | | 8Ω, FTC 20 Hz–20 kHz, 0.1% tdD | 185 W | 260 W | 450 W | 800 (650**) W | 1050 W | | 8Ω, EIA 1 kHz, 0.1% tdD | 200 W | 300 W | 500 W | 850 W | 1100 W | | 4Ω, FTC 20 Hz–20 kHz, 0.1% tdD | 280 W | 400 W | 650 W | 1300 W | 1600 W | | 4Ω, EIA 1 kHz, 0.1% tdD | 300 W | 500 W (0.5% tdD) | 800 W | 1400 W | 1800 W | | 2Ω, FTC 20 Hz–20 kHz, 1% tdD | – | – | – | 1600 W | 2000 W | | 2Ω, EIA 1 kHz, 1% tdD | 430 W | 700 W | 1200 W | 2000 W | 2500 W | | Power, Bridge-Mono Mode | | 8Ω, FTC 20 Hz–20 kHz, 0.1% tdD | 530 W | 800 W | 1300 W | 2600 W | 3200 W | | 8Ω, EIA 1 kHz, 0.1% tdD | 600 W | 900 W | 1500 W | 2800 W | 3600 W | | 4Ω, EIA 1 kHz, 1% tdD | 830 W | 1400 W | 2400 W | 4000 W | 5000 W | | Signal to Noise (20 Hz–20 kHz) | -100 dB | | Distortion (SMPTE-IM) | < 0.01% | < 0.02% | | Input Sensitivity at 8Ω | 1.15V (+3.4dBu) | 1.23V (+4.0 dBu) | 1.42V (+5.3 dBu) | | Voltage Gain | 31.6x (30 dB) | 40x (32 dB) | 50x (34 dB) | 64x (36 dB) | | Output Circuitry | Class AB | 2-tier Class H | 3-tier Class H | Current Draw (120 V AC) Typical, 1/8 power pink noise at 4Ω* Severe, 1/3 power pink noise at 4Ω* | 4.5 A 6.6 A | 6.0 A 9.6 A | 6.3 A 15.6 A | 10.0 A 20.1 A | 13.9 A 26.9 A | AC Mains Plug 100/120V 230V | NEMA 5-15 CEE7/7 | NEMA 5-20 CEE7/7 | Weight Net Shipping | 35 lb (15.9 kg) 41 lb (18.6 kg) | 40 lb (18.2 kg) 46 lb (20.9 kg) | 44.5 lb (20.2 kg) 50.5 lb (23 kg) | 68 lb (30.8 kg) 77 lb (34.9 kg) | 75 lb (33.1 kg) 87 lb (37.2 kg) | Distortion (typical) 20 Hz–20 kHz, 10 dB below rated power 1 kHz and below, full rated power | < 0.03% tdD, 4Ω and 8Ω < 0.03% tdD, 4Ω and 8Ω | < 0.02% tdD, 4Ω and 8Ω < 0.02% tdD, 4Ω and 8Ω | | Frequency Response | 20 Hz–20 kHz: +0/-1 dB -3 dB points: 5 Hz and 50 kHz (LF filter bybassed, 8Ω) | | Damping Factor (1 kHz and below) | > 300 at 8Ω | > 250 at 8Ω | | Input Impedance | 10 kΩ unbalanced; 20 kΩ balanced | | Input Stage Clipping | 10 V rms (+22 dBu) | 6.4 V rms (+18 dBu) | | Cooling | Continuously variable speed fan, back-to-front air flow | | Connectors (each channel) | Input: Active balanced; 3-pin Euro-style detachable terminal block and XLR (pin 2+) Output: Touch-proof binding posts; Neutrik Speakon® | | Controls | Front: AC switch; Channel 1 & 2 gain knobs Rear: 10-position DIP switch | | LED Indicators | Power on: Green; Signal: Yellow (1 per channel); Clip/Protect: Red (1 per channel) | | Amplifier Protection | Full short circuit, open circuit, tdermal, ultrasonic, RF protection. Stable into reactive or mismatched loads | | Load Protection | Turn-on/off muting; AC coupling (850, 1450); Triac crowbar (1850HD, 2450, 4050HD, 5050) on each channel | | Dimensions | 3.5” (8.9 cm) tall; 2 rack spaces | 5.25” (13.3 cm) tall; 3 rack spaces | | Power Requirements | 100, 120, 230 V AC (factory configured), 50–60 Hz |
All specifications are subject to change without notice.
QSC RMXa Specs
Connectors | Inputs (active balanced): 2
2x 3-pin Euro-style detachable terminal block
2 x 3-Pin XLR (pin 2+)
Output:
2 x touch-proof binding posts
2 x Neutrik Speakon connectors | | Stereo FTC Power | 8Ω / FTC 20 to 20,000 Hz / 0.1% THD: 800 W (650 W @ 1 1.0 kHz sine wave, 1% THD, 1 channel driven)
8Ω / EIA 1,000 Hz / 0.1% THD: 850 W
4Ω / FTC 20 to 20,000 Hz / 0.1% THD: 1300 W
4Ω / EIA 1,000 Hz / 0.1% THD: 1400 W
2Ω / FTC 20 to 20,000 Hz / 1% THD: 1600 W
2Ω / EIA 1,000 Hz / 1% THD: 2000 W | | Bridge | 8Ω / FTC 20 to 20,000 Hz / 0.1% THD: 2600 W
8Ω / EIA 1 kHz / 0.1% THD: 2800 W
4Ω / EIA 1 kHz / 1% THD: 4000 W | | Signal to Noise Ratio | > - 100 dB (20 to 20,000 Hz at 8 Ω) | | Distortion | SMPTE-M: < 0.02%
Typical: 20 Hz to 20 kHz 10 dB below rated power < 0.02% THD / 4 Ω and 8 Ω
1.0 kHz and below full rated power 0.02% THD / 4 Ω and 8 Ω | | Input Sensitivity @ 8 ohms | 1.42 V (5.3 dBu) | | Voltage Gain | 64x (36 dB) | | Output Circuit | 3-tier Class H | | Power Requirements | Typical, 1/8 Power Pink Noise at 4Ω: 10.0 A
Severe, 1/3 Power Pink Noise at 4Ω: 20.1 A | | Plug Type | Supplied: NEMA 5-15 (100 / 120 V)
CEE7/7 (230 V) | | Frequency Response | 20 Hz to 20 kHz: 0/-1 dB
-3 dB Points: 5 Hz and 50 kHz (LF filter bypassed / 8 Ω) | | Damping Factor | > 250 at 8Ω (1,000 Hz and below) | | Input Impedance | 10 kΩ unbalanced / 20 kΩ balanced | | Input Clipping Level | 6.4 Vrms (+18 dBu) | | Cooling | Continuously variable speed fan, back-to-front air flow | | Controls | Front: AC switch / channel 1 & 2 gain knobs
Rear: 10-position DIP switch | | Indicators | Power-On: Green LED
Signal: Yellow LED (1 per channel)
Clip: Red LED (1 per channel)
Protect: Red LED | | Protection | Amplifier: Stable into reactive or mismatched loads
Load: On/off muting, Triac crowbar on each channel | | Current Consumption | @ 120 V
2Ω Typical: 14.5 A, Full: 30.6 A, Maximum: 65.7 A
4Ω Typical: 10.0 A, Full: 20.1 A, Maximum: 42.2 A
8Ω Typical: 6.4 A, Full: 12.5 A, Maximum: 25.5 A | | Power Requirement | 100, 120, 230 VAC, 50 to 60 Hz (factory configured) | | Dimensions | 5.2 x 19.0 x 15.9" (132.0 x 483.0 x 404.0 mm) | | Weight | 68.0 lb (30.8 kg) |
|
|
 |