Turbosound Milan M12 1100-Watt Powered 12" Loudspeaker with KLARK TEKNIK DSP Technology

The Milan M12 1,100-Watt 2-Way 12" Powered Loudspeaker from Turbosound is a Class-D powered speaker that can be used for a variety of PA applications in both portable and installed scenarios. It features 2 independent input channels with mic and line inputs as well as a 2-band EQ and intelligent limiting. A mix output connector allows you to connect to other Milan series loudspeakers.

Its processing is powered by the integrated Klark Teknik DSP and has an electronic crossover. A low-cut filter at 100Hz allows you to use the M12 as a wedge monitor, but it can also be pole mounted or flown for a variety of placement options.
Its trapezoidal enclosure is constructed from high density polypropylene and is designed to reduce resonances internally. It features a recessed handle for carrying.

2 way full range powered loudspeaker for portable PA and installation applications

1,100 Watt power featuring Klark Teknik Class-D technology

Klark Teknik Digital Signal Processing for total system control

High excursion 12-inch low frequency driver with low mass voice coil for transient response

1-inch high temperature dome compression driver with extended high frequency reproduction

Converging elliptical waveguide provides wide dispersion and excellent pattern control

Speech/music switch featuring optimized equalization for voice or music applications

Switchable 100 Hz high pass filter for subwoofer integration

Lightweight composite enclosure with black finish

Rugged powder coated perforated steel mesh grille

Dual angle pole mount for accurate audience coverage

Multiple internal rigging points for installation applications

Components LF Driver: 1x 12" (304.8 mm)
HF Compression Driver: 1x 1"(25 mm) Frequency Response 50 Hz to 18 kHz, +/-3 dB
45 Hz to 20 kHz, +/-10 dB Nominal Dispersion 90° H x 60° V @ -6 dB points Maximum SPL 128 dB, peak Construction Injection-molded polypropylene enclosure
Recessed carrying handle
Integral dual-angle pole mount socket
6x M10 threaded internal rigging points Grille Powder coated galvanized perforated steel mesh grille with foam backing Connectors Mic/Line Input: XLRF/TRS combo jack, wired pin 2 hot
Mix Output: Male XLR wired pin 2 hot
IEC mains connector with integrated fuseholder Controls Level, Line/Mic, Low Cut, Speech/Music, Bass and Treble, Front LED, Mains on/off Indicators Blue Power LED
Green Signal LED
Red Limit LED
Red Clip LED Amplifier Type: Class D
Maximum Power Output: 1,000 W (LF) ; 100 W (HF)
Input Sensitivity: -32 dBu (Mic), -2 dBu (Line)
Microphone Input Impedance: 560 Ω unbalanced, 1 kΩ balanced
Line Input Impedance: 20 kΩ unbalanced, 40 kΩ balanced
EQ: Bass +/-6 dB @ 80 Hz, Treble +/-6 dB @ 12 kHz
Amplifier Protection: Full short circuit, open circuit, thermal Mains Voltage USA/Canada: 100-120 V~ (T 6.3 A H 250 V)
UK/Australia/Europe: 220-240 V~ (T 3.15 A H 250 V)
China: 220-240 V~ (T 3.15 A H 250 V)
Japan: 100-120 V~ (T 6.3 A H 250 V) Power Consumption 140 W @1/8 max power Dimensions (HxWxD) 24.4 x 15.5 x 13" (620 x 394 x 330 mm) Weight 45.1 lb (20.5 kg)